It is best to use the site plan to begin site grading. Layout (also known as a "Horizontal Control Plan") is added to the survey. This is usually done by electronic conversion (i.e. AutoCAD) of the survey. You can get the Hillside Grading Design & Development Services in LA for your construction work.
Image source google
Engineering team's graphical standards and overlaying an image of the conceptual. It can be topped with proposed plans. The engineer can then begin the process of working through the site grading process.
It is not necessary to display the Limit of Disturbance, LOD (Limit of Disturbance) graphically. On grading plans, the LOD is often the point in the proposed grading program. The proposed contour lines will cross with the existing contour lines.
Sometimes, the surface is damaged and grading doesn't change. The LOD is removed in these cases. Beyond the work proposed. The engineer may trace the existing contours. Lines with new contour lines are added to indicate that a disturbance occurred.
Either graphical methods are acceptable. The point at which the engineer can see the lines. The proposed grade must meet the grade in the current grade. Meeting/intersection of (existing, proposed) on the proposed Grading Plan.
It is always a good idea to refer to the Authority Having Jurisdiction for Land Development. To determine if any Engineering Design Standards and/or Ordinance Standards exist. The engineer should also confirm that the client complies with the municipality's requirements.
The engineer will need to provide design parameters before he can begin grading the site. The engineer must determine the elevations of the interfaces between existing elevations. Work and the proposed work (e.g., the driveway entrance to the existing).