When one of your vehicle's power windows stops working, it could be due to a faulty window regulator. If you've determined that the problem is with the motor, replacing it is a simple task.
When replacing the motor, we recommend consulting a repair handbook particular to the make and model of your vehicle, as the methods for disassembling car doors differ from vehicle to vehicle. You can also get the power window replacement service in Lancaster, CA.
Image Source: Google
Drilling tool and bits, hex key magnetic, painters tape, wrench, silicone spray, screwdriver, razor knife, white lithium grease, magnet, zip tie, plastic pry tool, socket wrench and sockets, gloves, and safety glasses are some of the items that are recommended for replacing a power window regulator.
Before we get started on the installation instructions, we'll go over some background information. The first thing you should do is make sure you're working in a clean, dust-free environment.
To begin, clean the window run channels with silicone spray before installing them. To avoid damaging the door panel, remove it with a plastic pry tool rather than a screwdriver.
Use painter's tape to secure the window to avoid damaging the residual surface. Finally, release or tighten the screws, nuts, and bolts with a magnetic wrench and screwdriver. There are essentially eight steps to replace a window regulator and motor assembly:
- Remove door trim
- Disconnect wiring
- Release connecting hardware
- Disconnect harness plug
- Install new window regulator
- Reconnect power supply
- Attach the window glass